Table of Contents
Advertisement
Item
Static IP:
MAC Address:
Name:
Enabled:
Add to list:
Delete selected item:
Add:
Block MAC address on the list with wrong IP address: When this option is activated, MAC addresses which
are not included in the list will not be able to connect with the Internet.
Show New IP user:
This function can reduce administrator's effort on checking MAC addresses one by one for the binding.
Furthermore, it is easy to make mistakes to fill out MAC addresses on the list manually. By checking this list,
administrator can see all MAC addresses which have traffic and are not bound yet. Also, if administrators find
that one specific bound MAC address is shown on the list, it means that the user changes the private IP
address.
Item
Name
Enabled
Apply
Select All
Refresh
Close
Gigabit Multi-Homing VPN Security Router User's Manual
Description
There are two ways to input static IP:
1. If users want to set up a MAC address to acquire IP from DHCP, but the IP
need not be a specific assigned IP, input 0.0.0.0 in the boxes. The boxes
cannot be left empty.
2. If users want DHCP to assign a static IP for a PC every single time, users
should input the IP address users want to assign to this computer in the boxes.
The server or PC which is to be bound will then acquire a static virtual IP
whenever it restarts.
Input the static real MAC (the address on the network card) for the server or PC
which is to be bound.
For distinguishing clients, input the name or address of the client that is to be
bound. The maximum acceptable characters are 12.
Activate this configuration.
Add the configuration or modification to the list.
Remove the selected binding from the list.
Add new binding.
Description
Input the name or address of the client that is to be bound. The maximum
acceptable characters are 12.
Choose the item to be bound.
Activate the configuration.
Choose all items on the list for binding.
Refresh the list.
Close the list.
- 61 -
Advertisement
Table of Contents
