Planet MH-3400 User Manual page 75

Item
Interface
Service Port
IP Address
Direction
Min. & Max.
Rate(Kbit/Sec)
Bandwidth Assign Type
Gigabit Multi-Homing VPN Security Router User's Manual
Description
Select on which WAN the QoS rule should be executed. It can be a single
selection or multiple selections.
Select what bandwidth control is to be configured in the QoS rule. If the
bandwidth for all services of each IP is to be controlled, select "All (TCP&UDP)
1~65535". If only FTP uploads or downloads need to be controlled, select "FTP
Port 21~21". Refer to the Default Service Port Number List.
This is to select which user is to be controlled. If only a single IP is to be
restricted, input this IP address, such as "192.168.1.100 to 100". The rule will
control only the IP 192.168.1.100. If an IP range is to be controlled, input the
range, such as "192.168.1.100 ~ 150". The rule will control IP addresses from
192.168.1.100 to 150. If all Intranet users that connect with the device are to be
controlled, input "0" in the boxes of IP address. This means all Intranet IP
addresses will be restricted. QoS can also control the range of Class B.
Upstream: Means the upload bandwidth for Intranet IP.
Downstream: Means the download bandwidth for Intranet IP.
Server in LAN, Upstream: If a Server for external connection has been built in
the device, this option is to control the bandwidth for the traffic coming from
outside to this Server.
Server in LAN, Downstream: If there are web sites built in the Intranet, this
option is to control the upload bandwidth for the connections from outside to
this Server. For example, game servers have been built in many Internet cafés.
This rule can be used to control the bandwidth for connections from outside to
the game server of a café to update data. In this way, game players inside the
café will not be affected.
The minimum bandwidth: The rule is to guarantee minimum available
bandwidth.
The maximum bandwidth: This rule is to restrict maximum available
bandwidth. The maximum bandwidth will not exceed the limit set up under this
rule.
The unit of calculation used in this rule is Kbit. Some software
indicates download/upload speed by the unit KB. 1KB = 8Kbit.
Attention
Sharing total bandwidth with all IP addresses: If this option is selected, all IP
addresses or Service Ports will share the bandwidth range (from minimum to
maximum bandwidth).
Assign bandwidth for each IP address: If this option is selected, every IP or
Service Port in this range can have this bandwidth (minimum to maximum.). For
- 69 -