Table of Contents
Advertisement
Multiple-Subnet Setting
Click "Add/Edit" to enter the configuration page, as shown in the following figure. Input the respective IP
addresses and subnet masks.
This function enables users to input IP segments that differ from the router network segment to the multi-net
segment configuration; the Internet will then be directly accessible. In other words, if there are already
different IP segment groups in the Intranet, the Internet is still accessible without making any changes to
internal PCs. Users can make changes according to their actual network structure.
Dynamic IP
There are four set of Class C DHCP server. The defaults are enable. LAN PCs can get IP automatically
without configured and recorded.
Item
IP Range Start
IP Range End
Gigabit Multi-Homing VPN Security Router User's Manual
Description
The four default IP segments initial from 192.168.1.100, 192.168.2.100,
192.168.3.100, 192.168.4.100. Users can configure according actual demand.
The four default IP segments end at 192.168.1.149, 192.168.2.149,
192.168.3.149, 192.168.4.149. It means there are 50 IPs in one of segments.
Users can configure according actual demand.
- 22 -
Advertisement
Table of Contents
