Service Port Management - Planet MH-3400 User Manual

Item
To select from this option the default list of service ports of the virtual host that users
Service
want to activate.
Such as: All (TCP&UDP) 0~65535, 80 (80~80) for WWW, and 21~21 for FTP. Please
refer to the list of default service ports.
Input the virtual host IP address.
IP Address
Select the WAN port.
Interface
Activate this function.
Enabled
Add or remove service ports from the list of service ports.
Service
Management
Add to the active service content.
Add to list

Service Port Management

The services in the list mentioned above are frequently used services. If the service users want to activate is
not in the list, we recommend that users use "Service Port Management" to add or remove ports, as follows:
Item
Input the name of the service port users want to activate on the list, such as E-donkey,
Service Name
etc.
To select whether a service port is TCP or UDP.
Protocol
To activate this function, input the range of the service port locations users want to
Port Range
Description
Description
Gigabit Multi-Homing VPN Security Router User's Manual
- 110 -