Table of Contents
Advertisement
12.4 SNMP
46B
Simple Network Management Protocol (SNMP) refers to network management communications protocol and
it is also an important network management item. Through this SNMP communications protocol, programs
with network management (i.e. SNMP Tools-HP Open View) can help communications of real-time
management. The device supports standard SNMP v1/v2c and is consistent with SNMP network
management software so as to get hold on to the operation of the online devices and the real-time network
information.
Item
Enabled
System Name
System Contact
System Location
Get Community
Name
Set Community
Name
Trap Community
Name
Send SNMP Trap to
Apply
Cancel
Description
Activate SNMP feature. The default is activated.
Set the name of the device such as Planet.
Set the name of the person who manages the device (i.e. John).
Define the location of the device (i.e. Taipei).
Set the name of the group or community that can view the device SNMP data. The
default setting is "Public".
Set the name of the group or community that can receive the device SNMP data. The
default setting is "Private".
Set user parameters (password required by the Trap-receiving host computer) to
receive Trap message.
Set one IP address or Domain Name for the Trap-receiving host computer.
Press "Apply" to save the settings.
Press "Cancel" to keep the settings unchanged.
Gigabit Multi-Homing VPN Security Router User's Manual
- 123 -
Advertisement
Table of Contents
