Lexmark 7300 series Service Manual page 26

4418-X6X
Code Name
1218 Serial Flash
Error
1219 Undefined
Signal Error
2100 Unlock
Scanner
2200 Scan Carrier
Stall
3100 Fax Error
2-6
Service Manual
Description
Invalid parameters
have been passed to
ReadFlashPage.
Microprocessor has
encountered a bad
signal (other than an
abort, illegal
instruction, or
arithmetic exception).
The scanner
mechanism is locked in
place or unable to
move due to other
failure.
The scan carrier has
stalled.
There is a general
error receiving or
sending fax.
Action
Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
Unlock the scanner.
Unplug the All-In-
One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, check all
connections to the
scanner. If
connections are okay
and the error
continues, replace
the system board.
Try resending or
receiving fax.