Lexmark 7300 series Service Manual page 23

Code Name
1104 Printhead
Order
1105 Auto Alignment
Failed
1200 Print Carrier
Stall
1201 Print
Incomplete
1202 Data Error
1203 Printhead Short
1204 Printhead
Programming
1205 Mono TSR
Error
1206 Color TSR
Error
Description
Unsupported order of
printheads
Automatic alignment
has failed.
The All-In-One print
carrier has stalled.
The print carrier
stopped before all the
data was used.
Incorrect data has
been sent from the
host computer to the
All-In-One.
A short test detected a
short-circuit in the
printhead.
Unable to program
pseudo-random
printhead ID
Problem in mono TSR
circuit; cannot
determine printhead
temperature.
Problem in color TSR
circuit; cannot
determine printhead
temperature.
Action
Install the print
cartridges in the
correct slots.
Replace the print
cartridge.
Unplug the All-In-
One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on.
Resend the print job.
Unplug the All-In-
One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
USB cable. If the
error continues,
replace the system
board.
Replace the print
cartridge.
Replace the print
cartridge.
Replace the print
cartridge.
Replace the print
cartridge.
Diagnostic information
4418-X6X
2-3