Canon HV10 Instruction Manual page 73

Hdv
Hide thumbs Also See for HV10:
Table of Contents

Advertisement

- - - - - - - - - - - - - - - - - - - - - - - - - - - - _ _ e ••••
Trouble?
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem
Solution
CO
• Camcorder will not turn on.
Battery pack is eXhausted. Replace or charge the battery pack.
18
• The camcorder switches off
by itself.
• The cassette compartment
Attach the battery pack correctly.
cover will not open.
• The cassette compartment
stopped half way while
inserting/removing a tape.
Use the compact power adapter.
• The LCD/viewfinder switches
on and off.
Battery pack will not charge.
Charge the battery pack in temperatures between 0 °C and
-
40°C (32
OF
and 104
OF).
Battery packs become hot with use and may not charge. The
-
charging will start once the battery pack temperature is below
40°C (104
OF).
The battery pack is damaged. Use a different battery pack.
-
Check that the compact power adapter is correctly connected to
the camcorder.
Recording/Playback
Problem
Solution
CO
Buttons will not work.
Turn on the camcorder.
-
Load a cassette.
19
Abnormal characters appear on
Disconnect the power source and reconnect it after a short time.
-
the screen. The camcorder
If the problem still persists, disconnect the power source and
does not operate properly.
press the RESET button with a pointed item. Pressing the
RESET button resets all settings.
"~"
flashes on the screen.
Load a cassette.
19
"G;;J"
flashes on the screen.
Battery pack is exhausted. Replace or charge the battery pack.
18
"[j]"
flashes on the screen.
Condensation is detected. See reference page.
82
The lens cover is not
Turn the camcorder off and then on again.
-
completely open.
"~"
flashes red on the screen.
The camcorder malfunctions. Consult a Canon Service Center.
-
"REMOVE THE CASSETTE"
Remove the cassette and reinsert it.
19
appears on the screen.
The wireless controller will not
Set [WL.REMOTE] to [ON].
37
work.
The battery of the wireless controller is exhausted. Replace the
21
battery.
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents