Charging The Battery Pack - Canon HV10 Instruction Manual

Getting Started •••••- - - - - - - - - - - - - - - - - - - - - - -
• Slide in the connector end of the
battery in the direction of the arrow and
press it gently until it clicks.
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
Remove the battery
terminal cover
before attaching the
battery
BATT. RELEASE switch
1
Turn off the camcorder.
2
Attach the battery pack to the
camcorder.
• Open the LCD panel.
3
Connect the power cord to the
compact power adapter.
4
Plug the power cord into a power
outlet.
S
Connect the compact power adapter
to the camcorder's DC IN terminal.
• The CHG (charge) indicator starts
flashing. The indicator will stay on
when the charging is completed.
Charging, Recording and Playback Times
The times given in the table below are approximate and vary depending on the actual
charging, recording or playback conditions.
00"'1\ ,,..
,..
~I\
(Optional)
"' 1
[8Q2] Standard Maximum Typical* Maximum Typical*
Recording (viewfinder) 75 min. 45 min. 140 min. 85 min.
Recording (LCD normal)
75 min.
45 min. 135 min. 85 min.
Recording (LCD bright) 70 min. 45 min. 130 min. 80 min.
Playback 85 min. 160 min.
~
Standard
Maximum Typical* Maximum Typical*
Recording (viewfinder) 90 min. 55 min.
165 min. 95 min.
Recording (LCD normal) 85 min. 50 min. 160 min. 95 min.
Recording (LCD bright) 80 min. 50 min. 150 min. 90 min.
Playback 95 min. 180 min.
Charging Time
150 min. 230 min.
*
Approximate times for recording with repeated operations such as starUstop, zooming, power on/off.