Canon HV10 Instruction Manual page 45

- - - - - - - - - - - - •••• Adjusting the Picture: Exposure, Focus and Color
Infinity Focus
Use this function when you wish to focus
on faraway subjects such as mountains or
fireworks.
1
Adjust the zoom.
2
Keep
[FOCUS)
pressed down for
more than 2 seconds.
• 00
appears.
• Pressing
I
FOCUS
I
again will return the
camcorder to autofocus.
• Operating the zoom or the [§TI] dial
(... ) will return the camcorder to
manual focus adjustment.
2
Press
[FOCUS ASSIST].
I;l
The center of the picture will be
L!J
magnified and the silhouettes will be
emphasized.
3
Adjust
CA.T)
the focus as required
until the image appears focused.
• You can also apply the peaking function
(without the magnification) by setting [ASSIST
FUNC.] to
[1m3
PEAKING]
(aJ
36).
• Using the focus assist functions will not affect
the recordings on the tape or memory card.
When you start recording, the assist functions
will be canceled and the display will return to
normal.
• In
ICAMERA·c:g1
mode, you can also use the
focus assist functions after pressing
[PHOTO
I
halfway.
• The camcorder will automatically return to
autofocus when you set the mode switch to
tmID.
White Balance
The white balance function helps you
accurately reproduce colors under
different lighting conditions so that white
objects will always look truly white in your
recordings.
(aJ 10)
• Default value
POINTS TO CHECK
[CAlHA
II
CA~RAII
Mode switch:
P
Options
~.-----------_._--~
Focus Assist Functions
The focus assist function will magnify the
center of the picture and emphasize the
outlines of the objects on screen
(peaking) to make it easier for you to
focus manually.
(11111)
I~I~IIII
Mode switch:
P, seN
1
Press
[SET).
"MF" appears.
(aJ 10)