Canon HV10 Instruction Manual page 35

- - - - - - - - - - - - - - - - - - - - - - a ••••
Menu Options Lists
I
COMP.OUT
-
»
0-
<
Q)
::J
(')
CD
0-
'TI
s:::
::J
(')
r+
o·
::J
en
"w•••..
~ " , ~ " " , ~,
"w.•
_w_.•
~c
lllyiil
[ffi!)
DV LOCKED], [I:I-!'ZA-N HDV/DV]
You can select the video standard to use
when connecting to an external device
using the HDV/DV terminal.
[1:I-lfJA-VA HDV/DV]: Switch
automatically between standards to
match the original standard of the
recordings.
[ffi!)
DV LOCKED]: All video output will
be in DV standard (recordings made in
HDV will be down-converted).
• The DV output cannot be changed
while a DV cable is connected to the
HDV/DV terminal.
You can select the video specifications to
0
use to connect the camcorder to a high-
E
definition TV using the video component
connection.
[ _ 480i]: To use the 480i specification
(standard definition TV).
[mIffilI 1080i/480i]: To use the full 1080i high
definition specification when possible, or
switch automatically to 480i specification
when 1080i is not supported by the TV.
• Select the [PLAYBACK STD] and
[CaMP OUT] settings according to the
specifications you want to use for
playback on a high-definition TV. Refer to
the table below.
• When the playback standard selected is
differentfrom that of the original recording,
there will be no playback picture.
I
DVOUTPUT
ST-1· ·ST-2
When [AUDIO OUT] is set to [EB MIX/
VAR.], adjust (.. ..,) the sound balance
with the
~
dial.
• The camcorder will retain the audio
balance adjustment, however if you turn
off the camcorder [AUDIO OUT] will be
reset to [51-1 STERE01].
[51-1 STERE01], [51-2 STERE02],
[1:1
MIX/FIXED],[EB MIX/VAR.]
You can select the audio track to use
during the playback of a tape with audio
dubbed over the recording.
[51-1 STERE01]: Original sound only.
[51-2 STERE02]: Dubbed audio only.
[1:1
MIX/FIXED]: Mixed audio with the
original sound and dubbed audio at the
same level.
[EB MIX/VAR.]: Mixed audio where the
balance between the original sound (51-1)
and the dubbed audio (51-2) can be
adjusted.
I
MIX BALANCE
I
AUDIO OUT
. [CAI RA
lICA~RA
II
~-;grl
f1fYll
[ _ 480i], [mIffilI 1080i/480i]
Settings for Video Output from the COMPONENT OUT Terminal
[8QY]
(1 080i)
@Z]
(480i)
[B AUTO] or
[~HDV]
[mIffilI1080i/480i]
[B AUTO]
or
[~HDV]
[ _ 480i]
[B
AUTO] or [ ffi!) DV] [mIffilI1 080i/480i] or
L-
480i]