Canon HV10 Instruction Manual page 51

- - - - - - - - - - - - - - - - - - - - - - _ _ e • • • •
Other Functions
Selecting the Data Code
You can select the data code to be
displayed when playing back movies.
Options
+
Default value
Shadows
<=====>
Highlights
(CO 10)
Select a recording program other than
[II
FIREWORKS] (SeN).
Options
+
Default value
If you turn all displays on with
l!2!§£'J,
the
histogram display will appear also after
recording a still image while reviewing it within
the time set for the [REVI EW] option (or
immediately after recording it, if [REVIEW] is set
to [[m OFF]).
Flash
You can use the built-in flash for
recording still images in dark places. The
flash is equipped with the red-eye
reduction function.
I
DATA CODE
Displays the exposure, shutter speed, date
and time of the recording.
~~~~)
MENU
;IS!T
(MENUj
¢I
DISPLAY SETUP/@)
.lJ,
I
MENU
I
¢:J
I
Desired option
Reading the Histogram Display
When viewing still images you can
display the histogram display and the
icons of all the functions used at the time
of recording. Use, the histogram as a
reference to verify the correct exposure of
the still image.
The area to the right of the histogram
represents highlights and the left side
represents shadows. A still image whose
histogram skews to the right is relatively
bright; while one whose histogram peaks
to the left, is relatively dark.