Positioning The Seat; Unlatching The Seat; Pushing The Machine By Hand - Toro Z580-D Z Master Operator's Manual

Positioning the Seat

Changing the Seat Position
The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
1. To adjust, move the lever sideways to unlock seat
(Figure 28).
2. Slide the seat to the desired position and release the
lever to lock it in position.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and
comfortable ride. Position the seat where you are most
comfortable.
To adjust, turn the knob in front either direction to
provide the best comfort (Figure 28).
Figure 28
1. Seat suspension knob
Changing the Back Position
The back of the seat can be adjusted to provide a
comfortable ride. Position the back of the seat where it
is most comfortable.
To adjust, turn the knob, under the rightside arm rest, in
either direction to provide the best comfort (Figure 29).
g012486
2. Seat position lever
1. Back rest knob

Unlatching the Seat

1. Move the seat to the most rearward position. This
will prevent interference when the seat is raised.
2. Push the seat latch rearward to unlatch the seat.
3. Raise the seat up. This will allow access to the
machine under the seat (Figure 30).
1. Seat latch
2. Fuel cap

Pushing the Machine by Hand

Important: Always push the machine by hand.
Never tow the machine because hydraulic damage
may occur.
Pushing the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to off. Move the levers to neutral locked
position and apply parking brake. Remove the key.
27
g012487
Figure 29
2. Rightside arm rest
Figure 30
3. Seat