Hour Meter; Product Overview; Controls; Throttle Control - Toro Z580-D Z Master Operator's Manual

Product Overview

1. Z Stand ©
2. Height-of-cut lever
3. Motion control lever
4. Seat belt
5. Roll bar

Controls

Become familiar with all the controls before you start the
engine and operate the machine (Figure 4 and Figure 5).

1. Hour meter

2. Ignition switch
3. Fuel selector valve
4. Audible alarm
5. Glow plug switch
Figure 4
6. Fuel cap (both sides)
7. Parking brake lever
8. Mower deck
9. Caster wheel
Figure 5
6. Glow plug light
7. Engine Temperature light

8. Throttle control

9. PTO Switch
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 5).
Safety Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the Run
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
1. Safety interlock symbols
2. Hour meter
Throttle Control
The throttle control is variable between Fast and Slow.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch to drive the mower blades with the motion
control levers in the center, un-locked position. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system and to determine neutral position.
15
Figure 6
3. Battery light