Exterior Lamps Off; Reminder; Headlamp Main/Dipped-Beam; Changer - Chevrolet 2015 Corvette Owner's Manual

6-2 Lighting
To reset to AUTO mode turn the
control to exterior lamps and then
back to AUTO. Automatic mode also
resets when the vehicle is turned off
and then back on again if the control
is left in the AUTO position.
(Parking Lamps): Turns on the
parking lamps including all lamps,
except the headlamps.
The handbrake indicator light comes
on and stays on when the parking
lamps are on with the engine off and
the ignition in ACC/ACCESSORY.
(Headlamps): Turns on the
headlamps together with the parking
lamps and instrument panel lights.

Exterior Lamps Off

Reminder

A warning chime will sound if the
exterior lamp control is left on in
either the headlight or parking light
position and the driver door is
opened with the ignition off.
Headlamp Main/
Dipped-Beam Changer
Push the indicator lever away from
you and release to turn the main
beams on. To return to dipped
beams, push the stalk again or pull
it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

To use the flash-to-pass feature,
briefly pull the turn signal lever
toward you. The main-beam
indicator flashes to indicate to the
other driver that you intend to pass.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day.
The DRL system makes the
dedicated lamps come on when the
following conditions are met:
It is still daylight and the ignition
is on.
The exterior lamp control is in
the AUTO position.
The handbrake is off.
When DRL are on, only the front
lamps will be on. The parking
lamps, tail lamps, instrument panel
lights, or other exterior lamps will
not be on when the DRL are
being used.
When it is dark enough outside, the
front lamps dim to parking lamps
and the normal dipped beam
headlamps turn on.