Chevrolet 2015 Corvette Owner's Manual page 204

With the manual gearbox, the cruise
control will remain active when the
gears are shifted. The cruise is
disengaged if the clutch is pressed
for several seconds.
If the Traction Control System (TCS)
begins to limit wheel spin while you
are using cruise control, the cruise
control automatically disengages.
See Traction Control/Electronic
Stability Control on page 9-26.
When road conditions allow for
using safely again, cruise control
can be turned back on.
If the brakes are applied, the cruise
control disengages.
1
(On/Off): Press to turn cruise
control on and off. A white indicator
appears in the instrument cluster
when cruise is turned on.
RES/+ (Resume/Accelerate): If
there is a set speed in memory,
press briefly to resume to that
speed or press and hold to
accelerate. If cruise control is
already active, use to increase
vehicle speed.
Driving and Operating
SET/- (Set/Coast): Press briefly to
set the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle
speed.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
1
If the button is on when not in
use, SET/ or RES/+ could get
pressed and go into cruise when not
1
desired. Keep the
when cruise is not being used.
1
1. Press the button to turn the
cruise system on.
2. Get up to the desired speed.
3. Press and release SET/ .
4. Remove foot from the
accelerator.
9-37
button off