Chevrolet 2015 Corvette Owner's Manual page 268

Anytime unusual wear is
noticed, rotate the tyres as soon
as possible, check for proper
tyre inflation pressure, and
check for damaged tyres or
wheels. If the unusual wear
continues after the rotation,
check the wheel alignment. See
When It Is Time for New Tyres
on page 10-56 and Wheel
Replacement on page 10-59.
Different tyre sizes should not
be rotated front to rear.
Use this rotation pattern if the
vehicle has different size tires
on the front and rear.
Adjust the front and rear tyres to
the recommended inflation
pressure on the Tyre and
Loading Information label after
the tyres have been rotated. See
Tyre Pressure on page 10-48
and Vehicle Load Limits on
page 9-12.
Reset the Tyre Pressure Monitor
System. See Tyre Pressure
Monitor Operation on
page 10-52.
Check that all wheel nuts are
properly tightened. See Wheel
Nut Torque under Capacities
and Specifications on
page 12-3.
Vehicle Care
Warning
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, a cloth or a paper
towel can be used; however, use
a scraper or wire brush later to
remove all rust or dirt.
Lightly coat the centre of the
wheel hub with wheel bearing
grease after a wheel change or
tyre rotation to prevent corrosion
or rust build-up. Do not get
grease on the flat wheel
mounting surface or on the
wheel nuts or bolts.
10-55