Chevrolet 2015 Corvette Owner's Manual page 39

2-14 Keys, Doors, and Windows
On Solid: Vehicle is secured
during the delay to arm the system.
Fast Flash: Vehicle is unsecured.
A door, the bonnet, or the hatch/
boot is open.
Slow Flash: Alarm system is
armed.
Arming the Alarm System
1. Turn off the vehicle.
2. Lock the vehicle in one of
three ways:
Use the RKE transmitter.
Use the Keyless Access
system.
With a door open, press
on the interior of the door.
3. After 30 seconds the alarm
system will arm, and the
indicator light will begin to slowly
flash indicating the alarm system
is operating. Pressing
RKE transmitter a second time
will bypass the 30-second delay
and immediately arm the alarm
system.
The vehicle alarm system will not
arm if the doors are locked with
the key.
If the driver door is opened without
first unlocking with the RKE
transmitter, the horn will chirp and
the lights will flash to indicate
pre-alarm. If the vehicle is not
started, or the door is not unlocked
by pressing
transmitter during the 10-second
pre-alarm, the alarm will be
activated.
The alarm will also be activated if
the passenger door, the hatch/boot,
or the bonnet is opened without first
disarming the system. When the
alarm is activated, the indicators
flash and the horn sounds for about
30 seconds. The alarm system will
on the then re-arm to monitor for the next
unauthorised event.
on the RKE
Disarming the Alarm System
To disarm the alarm system or turn
off the alarm if it has been activated,
do one of the following:
Press on the RKE transmitter.
Unlock the vehicle using the
Keyless Access system.
Start the vehicle.
To avoid setting off the alarm by
accident:
Lock the vehicle after all
occupants have left the vehicle
and both doors are closed.
Always unlock a door with the
RKE transmitter or use the
Keyless Access system.
Unlocking the driver door with the
key will not disarm the system or
turn off the alarm.