Wiper Blade Replacement - Chevrolet 2015 Corvette Owner's Manual

2. Firmly apply both the parking
brake and the regular brake.
See Electric Parking Brake on
page 9-24.
Do not use the accelerator
pedal, and be ready to turn off
the engine immediately if it
starts.
3. Put the gear lever in Neutral,
push the clutch pedal down
halfway, and try to start the
engine. The vehicle should start
only when the clutch pedal is
pushed down all the way to the
floor. If the vehicle starts when
the clutch pedal is not pushed all
the way down, contact your
dealer for service.

Wiper Blade Replacement

Windscreen wiper blades should be
inspected for wear and cracking.
Replacement blades come in
different types and are removed in
different ways. For proper type and
length, see Maintenance
Replacement Parts on page 11-5.
To replace the windscreen wiper
blade:
1. Open the bonnet.
2. Pull the windscreen wiper
assembly away from the
windscreen.
3. Lift up on the latch in the middle
of the wiper blade where the
wiper arm attaches.
4. With the catch open, pull the
wiper blade down towards the
windscreen far enough to
release it from the J-hooked end
of the wiper arm.
Vehicle Care
5. Remove the wiper blade.
Allowing the wiper blade arm to
touch the windscreen when no
wiper blade is installed could
damage the windscreen. Any
damage that occurs would not
be covered by the vehicle
warranty. Do not allow the wiper
blade arm to touch the
windscreen.
6. Reverse Steps 1 3 for wiper
blade replacement.
Windscreen Replacement
The windscreen is part of the HUD
system. If the vehicle has to have
the windscreen replaced, get one
that is designed for HUD or the
HUD image may look out of focus.
10-35