Exterior Lamps Off Reminder; Headlamp High/Low-Beam Changer; Flash-To-Pass; Daytime Running Lamps (Drl) - Chevrolet Colorado 2024 Owner's Manual

102 Lighting
.
The system detects a preceding vehicle's
taillamps.
. The outside light is bright enough that
high-beam headlamps are not required.
. The vehicle speed drops below 20 km/h
(12 mph).
The high beams may not turn off
automatically if the system cannot detect
another vehicle's lamps because of any of
the following:
. The other vehicle's lamps are missing,
damaged, obstructed from view,
or otherwise undetected.
. The other vehicle's lamps are covered
with dirt, snow, and/or road spray.
. The other vehicle's lamps cannot be
detected due to dense exhaust, smoke,
fog, snow, road spray, mist, or other
airborne obstructions.
. The vehicle windshield is dirty, cracked,
or obstructed by something that blocks
the view of the light sensor.
. The vehicle is loaded such that the front
end points upward, causing the light
sensor to aim high and not detect
headlamps and taillamps.
. The vehicle is being driven on winding or
hilly roads.
The automatic high-beam headlamps may
need to be disabled if any of the above
conditions exist.

Exterior Lamps Off Reminder

A reminder chime sounds when the
headlamps or parking lamps are manually
turned on, the ignition is off, and a door is
open. To disable the chime, turn the
lamps off.
Headlamp High/Low-Beam
Changer
Push the turn signal lever away from you
and release to turn the high beams on.
To return to low beams, push the lever
again or pull it toward you and release.
When the high-beam headlamps are on, this
indicator light on the instrument cluster will
also be on.

Flash-to-Pass

This feature lets you use the high-beam
headlamps to signal a driver in front of you
that you want to pass.
To use it, pull the turn signal lever toward
you, then release it.
They will stay on as long as you hold the
lever toward you. The high-beam indicator
on the instrument cluster will come on.
Release the lever to return to normal
operation.

Daytime Running Lamps (DRL)

DRL can make it easier for others to see the
front of your vehicle during the day.
Fully functional DRL are required on all
vehicles first sold in Canada.
The DRL come on when all of the following
conditions are met:
. The vehicle is on.
.
The exterior lamp control is in the Auto
position.
. The light sensor determines it is daytime.
The taillamps, instrument panel lights, and
other lamps will not turn on when this
feature is activated.