Low Power Mode; System Reset; Auto Off - Ricoh 40105 Operating Instructions Manual

&RPELQHG )XQFWLRQ 2SHUDWLRQV
6DYLQJ (QHUJ\

- Low Power Mode

- - -
If you do not operate the machine for a specified period of time after an opera-
tion, or when you press the { { { { (QHUJ\ 6DYHU } } } } key, the display disappears and the
machine goes into Low Power mode. When you press the { { { { (QHUJ\ 6DYHU } } } } key
again, the machine returns to the "Ready" status. In Low Power mode, the ma-

chine uses less electricity.
1RWH
❒
You can change the Panel Off Timer. See p.67 "Panel Off Timer".

- System Reset

- - -
The machine automatically returns to its initial condition when a job is finished,
after a specified period of time. This function is called "System Reset".
1RWH
❒
You can change the System Reset Timer. See p.67 "System Auto Reset Timer".

- Auto Off

- - -
The machine automatically turns itself off after a job is finished, after a specified
period of time. This function is called "Auto Off".
1RWH
❒
You can change the Auto Off Timer. See p.66 "Auto Off Timer".
❒
Auto Off Timer will not operate in the following cases:
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the cover is open
• When the "Adding Toner" message appears
• When toner is being added
• When the User Tools or Counter screen is displayed
• When fixed warm-up is in progress
• When printer or other functions are operating
28