Getting Started; Guide To Components - Ricoh 40105 Operating Instructions Manual

Guide to Components

1.
Exposure glass
Place single-page originals here face
down for copying.
2.
Auto Document Feeder (ADF)
The ADF automatically feeds a stack of
originals one by one.
3.
Control panel
See p.20 "Control Panel".
4.
On indicator
This indicator lights when you press the
operation switch.
5.
Operation switch
Press when you want to use the machine. The
On indicator lights when this switch is
pressed. See p.24 "Turning On the Power".
6.
Front cover
Open to remove misfed paper.

2. Getting Started

7.
Paper tray
Place copy paper here.
Tray 1 is a tandem tray where paper on
the left side automatically moves to the
right when paper there has run out.
8.
Main power switch
Press to turn the main power on or off.
We recommend you only turn this switch
off when the machine is not going to be
used for an extended period of time (e.g.
over a vacation). See p.24 "Turning On
the Power".
9.
Toner cover
Open to change the toner bottle.
10.
Suspend/Resume switch
Press to momentarily stop copying.
Pressing again resumes the stopped op-
eration.
ZJBH030N
17