Installing Firmware With Firmware Loader - Extron electronics XTP T USW 103 User Manual

Installing Firmware with Firmware Loader

1.
Connect the host device to the front panel USB port.
2. Open Firmware Loader and establish a connection between the computer and the
device. The Add Device... dialog box opens.
Figure 31.
3. From the Device Name drop-down list, select
4. From the
Available Devices
5. From the
6. Click the
7. Click the
8. On the Open dialog box, navigate to the new firmware file, which has an .S19
extension, and select it.
ATTENTION:
other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
9. Click the
10. Click the
are listed in the Firmware Loader main window.
11. Click the
12. Close Firmware Loader when the
Progress
Add Device... Dialog Box
drop-down list, select the method of connection. The
Connection Method
drop-down list appears.
drop-down list, select the desired device.
Available Devices
button.
Connect
button in the New File Firmware (Optional) panel.
Browse
Valid firmware files must have the file extension .S19. A file with any
button. The Browse dialog box opens.
Open
button. The Add Device... dialog box closes and the device and firmware
Add
button to start the upload process.
Begin
Remaining Time
column shows , and the
100%
XTP T USW 103 Switcher • Reference Information
.
XTP T USW 103
field shows
00.00.00
field shows
Status completed
, the
.
35