Installing Firmware With Firmware Loader - Extron electronics XTP T USW 103 User Manual

Installing Firmware with Firmware Loader

1.
Connect the host device to the front panel USB port.
2. Open Firmware Loader and establish a connection between the computer and the
device. The Add Device... dialog box opens.
Figure 21.
3. Select XTP T USW 103 from the
4. Select the method of connection from the
5. Depending on the connection method, additional options appear. Make the appropriate
selections for the current connection method.
6. Click the
7. Click the
8. On the Open dialog box, navigate to the new firmware file, which has an .S19 extension,
and click the
ATTENTION:
any other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
9. Click the
are listed in the Firmware Loader main window.
10. Click the
11. Close Firmware Loader when the
Progress
Add Device... Dialog Box
Device Name
button.
Connect
button in the New File Firmware (Optional) section.
Browse
button.
Open
Valid firmware files must have the file extension .S19. A file with
button. The Add Device... dialog box closes and the device and firmware
Add
button to start the upload process.
Begin
Remaining Time
column is , and the
100% Status
drop-down list.
drop-down list.
Connection Method
field shows
00.00.00
field is .
completed
XTP T USW 103 • Reference Information
, the
30