Edid Commands; Advanced Configuration Commands - Extron electronics XTP T USW 103 User Manual

Command

EDID Commands

NOTE: For EDID management, use the XTP System Configuration Software (see

Advanced Configuration Commands

Front panel lockout mode (executive mode)
Set front panel lockout mode
View front panel lockout
mode status
HDCP authorized device (HDMI inputs only)
HDCP authorized device On
HDCP authorized device Off
Query HDCP authorized
device status
X!
= Input selection
NOTE:
X@
= HDMI input selection
X$
= Enable or disable
X2)
= HDCP Authorization
ASCII Command Response
(Host to Device) (Device to Host)
X$
X Exe
X
Exe
E X@ }
E *1HDCP HdcpE
E X@ }
E *0HDCP HdcpE
E X@ }
E HDCP HdcpE
= VGA (input 1)
1
= HDMI (input 2)
2
= HDMI (input 3)
3
= HDMI (input 2)
1
= HDMI (input 3)
2
= disable or unlock (default for executive mode)
0
= enable or lock
1
= HDCP authorization off
0
= HDCP authorization on (default)
1
XTP T USW 103 Switcher • SIS Configuration and Control
Additional Description
EDID Minder
X$] Lock or unlock the front panel.
X$] View the executive mode status.
X@ ]
Set HDMI input
*1
authorized device.
X@ ]
Set HDMI input
*0
non-HDCP authorized device.
X@ X2)] View the HDCP authorized
*
device status of input
on page 30).
X@
as an HDCP
X@
as a
X@
.
17