Extron electronics XTP T USW 103 User Manual page 10

Three input switcher with an integrated xtp transmitte
Hide thumbs Also See for XTP T USW 103:
Table of Contents

Advertisement

By default, audio input is selected automatically (see
commands on page 15 to manually select audio inputs). When input 2 or 3 is selected
with automatic audio input selections, the switcher prioritizes embedded digital audio.
The following table shows the audio format that is sent over the XTP connection when a
specific audio format is not specified.
Selected
HDMI Embedded
Video Input
Audio Present
VGA
VGA
HDMI
HDMI
HDMI
HDMI
Analog video connector — Connect a video source to the female 15-pin HD
B
connector, labeled input 1. It accepts RGBHV video signals.
HDMI connectors — Connect a digital video source device to either or both female
C
HDMI connectors, labeled inputs 2 and 3. They can accept HDMI, DVI, or dual mode
DisplayPort video sources.
NOTES:
The maximum cable length is 15 feet.
Use Extron LockIt lacing brackets to secure HDMI connectors to the device
(see
HDMI Connection
XTP connector — Connect a twisted pair cable to the RJ-45 connector labeled
D
XTP Out and the XTP input port on another XTP device to pass all signals (see
TP Cable Termination and Recommendations
following signals:
Digital video
Digital audio
Bidirectional RS-232 and IR commands
Remote power
Ethernet communication
System communication
Link LED indicator — Lights yellow when XTP devices are connected and
communication is established.
Signal LED indicator — Lights green when the transmitter outputs a video signal or a
test pattern.
ATTENTION:
Do not connect this connector to a computer data or telecommunications
network.
XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see
page 9).
LAN connector — Connect a control device or device to be controlled to this LAN
E
connector for 10/100 Ethernet communication through this pass-through port. LEDs on
this connector indicate link and activity status.
Analog Audio
Present
N/A
Yes
N/A
No
Yes
No
Yes
Yes
No
Yes
No
No
on page 5).
on page 6). This cable carries the
XTP T USW 103 Switcher • Installation
Audio input selection
SIS
Audio Sent Over XTP
Analog audio
No audio
HDMI embedded audio
HDMI embedded audio
Analog audio
No audio
Remote power
on
4

Advertisement

Table of Contents
loading

Table of Contents