Table of Contents
Advertisement
Downloading and Installing the Firmware Loader
Extron recommends using the Firmware Loader software to update the firmware on the
MSW 4V rs and MSW 4SV rs. If you do not already have the Firmware Loader software
installed on your computer, download it as follows:
1.
Go to www.extron.com/download.
2.
On the Download Center screen, click Software in the left sidebar menu.
3.
On the next Download Center screen, locate and click the Download link for the
latest version of Firmware Loader.
Figure 13.
4.
On the next screen, enter the requested information, then click the
Download fw_loadernxnxn.exe button (where n is the Firmware Loader version
number).
5.
Follow the instructions on the rest of the download screens to save the executable
Firmware Loader installer file to your computer. Note the folder to which you saved
the file.
6.
In Windows Explorer or another file browser, locate the downloaded executable
installer file and double-click it to open it.
7.
Follow the instructions on the Installation Wizard screens to install the Firmware
Loader to your computer. Unless you specify otherwise, the installer program places
the Firmware Loader file at C:\Program Files\Extron\FWLoader.
Using the Control Program to Update the Firmware
To upload the latest firmware to the MSW using the control program, do the following:
1.
Open the Universal Switcher Control Program (see
10).
2.
From the Configure menu, choose Firmware Loader.
NOTE:
Figure 14.
Firmware Loader Download Link
Firmware Loader must be installed on the PC for this option to work.
Choosing Firmware Loader
MSW 4V rs and MSW 4SV rs • Control Software
"Using the
software," on page
12
Advertisement
Table of Contents
