Alignment (Cyan, Yellow, And Magenta) - Lexmark C52 series Service Manual

5022-xxx
2.
Adjust the right margin until the points of the left alignment marks touch the edge of the page.
•
Decreasing the value (
•
Increasing the value (
3.
Press Select (
4.
Print the Quick Test page, and check the results. Repeat if necessary.
5.
When the registration is complete, proceed to the color alignments.

Alignment (cyan, yellow, and magenta)

1.
Press Back (
press Select (
2.
Select Cyan.
3.
Select Top Margin, and use
4.
Select Left Margin, Right Margin, Bottom Margin, Skew, and Bow. In each menu, use
zero, and press Select (
It is important to set all the values to zero before starting.
5.
Select Quick Test in the Cyan menu, and press Select (
Two pages print. You may have to print these pages several times until you get T and Z aligned. Do not go
to step 2 until T and Z are aligned. The first page is similar to the following:
4-10
Service Manual
) moves the right side alignment marks to the right.
) moves the right side alignment marks to the left.
) to save the value.
) on the operator panel until you reach the top menu, select ALIGNMENT MENU, and
).
or to select zero. Press Select (
) to save the value.
) to save the setting.
).
or to select