Font Sharpening; Exit Config Menu - Lexmark C52 series Service Manual

5022-xxx

Font Sharpening

Lets a user set a text point-size value below the setting of the high frequency screens used when printing font
data. This menu item only affects the PostScript, PCL 5, PCL XL, and PDF emulators.
Settings are in the range of 0–150 (24 is the default). For example, if the value is set to 24, then all fonts sized 24
points or less use the high frequency screens. To increase value by 1, press
press .

Exit Config Menu

Press Select to exit the CONFIG MENU. The printer performs a power-on reset and returns to normal mode.
3-26
Service Manual
; to decrease the value by 1,