Lanier 5622 AG Operator's Manual page 50

Mode after you select Copy
Mode before you select
Data Reception
Sort Print
Stapling
Operations for Scanning
Scanning
Operations for Document
Server
Scanning a Document to Store
in Document Server
Printing from Document
Server
Printing from Document
Server
Sending a Facsimile from Doc-
ument Server
*1
Simultaneous operations are only available after the preceding job documents are all
scanned and the [Next Job] key appears.
*2
You can scan a document after the preceding job documents are all scanned.
*3
Simultaneous operations are only possible with an additional line installed and
when the facsimile function is not using the line given line priority in the facsimile
settings.
*4
During stapling, printing automatically starts after the current job.
*5
Stapling is not available.
*6
Simultaneous operations become available after you press the [Next Job] key.
*7
If you are making stapled copies with paper larger than A4, 8
erational 1000 sheet finisher, subsequent operations using the finisher shift tray are
suspended until the current job is finished.
*8
If you scan a document during printing, the scanning speed might be slow.
*9
During parallel receptions, any subsequent job is suspended until the receptions are
completed.
Facsimile
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ → → → ❍ ❍ ❍ ❍ ❍ ❍ ❍
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ → → ❍ ❍ ❍ ❍ ❍ ❍ ❍
❍ → ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ → → ❍ ❍ ❍ ❍ ❍
*5
$ $ $ ❍ ❍ $ $ ❍ $ ❍ ❍ ❍ ❍ ❍ × × $ $ $ ❍ ❍
× × × × × × × ❍ × ❍ ❍ ❍ ❍ ❍ × × × × × ❍ ❍
$ $ $ ❍ ❍ $ $ ❍ $ ❍ ❍ ❍ ❍ ❍ $ $ × × × ❍ ❍
$ × × ❍ ❍ $ × ❍ × ❍ ❍ ❍ ❍ ❍ $ × × × × ❍ ❍
$ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
*4
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ → ❍
*4
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
*3
Printer
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ →
*3 *3 *3
" × 11" using the op-
1
/
2
Multi-Access
2
❍ ❍
*4 *4
❍ ❍ ❍ ❍
*8 *8 *8
37