10) PCL Font Number
Enter the font number of the internal PCL font to be used as the default font for printing. You
can check the font numbers and internal PCL fonts in the Internal PCL Font List. Please see
the Printing Guide for the font number of internal PCL fonts,
11) PCL Line Termination
Select the type of the line termination.
12) Symbol set
Select the symbol set that applies to a raw job.
13) Paper Source
Select the paper source that applies to a raw job.
14) Do not Print Blank Pages
Select whether blank pages are printed or not.
Setting up the Raw Job Setting
In Raw Job Setting, you can add up to 16 LPR queue names and specify the raw job setting for
each queue. These queue names can be used when printing without a printer driver, such as
printing from Unix workstation.
You can add, edit, or delete a LPR queue.
P.183 "Adding or Editing a LPR queue"
P.185 "Deleting a LPR queue"
Adding or Editing a LPR queue
1
To add a new LPR queue, click [Add] in Raw Job Setting.
To edit an existing LPR queue, select a radio button of a queue that
you want to edit and click [Edit].
The Add New LPR Queue page is displayed.
Setting up from TopAccess
183