Toshiba e-STUDIO 600 User Manual page 126

7 TopAccess Administrator Mode
11) Default Gateway
Enter the gateway address if required when "Static IP" is selected in the "Address Mode"
drop down box.
12) IP Filtering
When you want to set the IP filtering for Raw TCP, LPR, and IPP printing, specify the range
of IP addresses in the Start Address and End Address fields.
When you specify the range of IP addresses, only the client that the specified IP address
range is assigned can perform Raw TCP, LPR, and IPP printing.
IP Filtering can restrict the accesses for Raw TCP, LPR, and IPP printing. The accesses
using other protocols are not restricted.
Setting up the IPv6
You can set the IPv6 protocol to enable the communication over IPv6.
1
2
3
4
5
5
1) Enable IPv6
Select whether the IPv6X/SPX protocol is enabled or disabled.
2) Link Local Address
The unique address used for the IPv6 is displayed.
126 Setting up from TopAccess