Setting Up The Device Information - Toshiba e-STUDIO 600 User Manual

7 TopAccess Administrator Mode

Setting up the Device Information

You can set the device information displayed in the Device tab page.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1) Name
This displays the equipment's device name.
2) Copier Model
This displays the equipment's model name.
3) Save as File Space Available
This displays the available size to store the Save as file documents.
4) Store to e-Filing Space Available
This displays the available size to store the e-Filing documents.
5) Fax Transmission Space Available
This displays the available size to send the fax data. This is displayed only when the fax unit
is installed.
6) Fax Reception Space Available
This displays the available size to receive the fax data. This is displayed only when the fax
unit is installed.
7) Work Space Available
This displays the percentages of available hard disk space to store the temporary data.
8) Department Code
Select whether the department management is enabled or disabled.
9) Department Code Enforcement
Select whether invalid jobs, which a department code is not specified or invalid department
code is specified, are printed or stored in the invalid job list when the department code is
enabled.
- ON — Select this to not print the invalid jobs and store them in the invalid job list.
- Print — Select this to print the invalid jobs.
- Delete — Select this to delete the invalid jobs without storing them in the invalid job list.
118 Setting up from TopAccess