Setting: Density In Photo Mode - Kyocera KM-2540 Service Manual

Maintenance
item No.

Setting: Density in photo mode

U093
1. Select the item to be set.
2. Adjust the setting using the cursor up/down keys.
Display
PHOTO DARKER
PHOTO LIGTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in text in fax mode
1. Select the item to be set.
2. Adjust the setting using the cursor up/down keys.
Display
FAX TEXT DARKER
FAX TEXT LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in photo in fax mode
1. Select the item to be set.
2. Adjust the setting using the cursor up/down keys.
Display
FAX PHOTO DARKER Change in density when manual density is set
FAX PHOTO LIGTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Change in density when manual density is set dark 0 to 3
Change in density when manual density is set light 0 to 3
Description
Change in density when manual density is set
dark
Change in density when manual density is set
light
Description
dark
Change in density when manual density is set
light
2JB/2JC
Setting Initial
range setting
0
0
Setting Initial
range setting
0 to 4 2
0 to 4 2
Setting Initial
range setting
0 to 6 3
0 to 6 3
1-3-31