Default Settings For Copying; Density - Kyocera KM-2540 Service Manual

2JB/2JC

(3) Default settings for copying

Density

Set the exposure mode for default settings mode.
1. Select [Density Mode] using the cursor up/down
keys and press [Change #].
2. Select [Manual] or [Auto].
Density steps
Change the exposure adjustment step amount.
1. Select [Exposure Steps] using the cursor up/down
keys and press [Change #].
2. Select [1 step] or [0.5 step].
Original image quality
Set the original image quality for default settings mode.
1. Select [Original Image] using the cursor up/down
keys and press [Change #].
2. Select [Text+Photo], [Photo] or [Text].
Setting EcoPrint
Set EcoPrint for default settings mode.
1. Select [EcoPrint] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].
Adjusting background density
If the background on copies appears too dark, you can
lighten it.
1. Select [Background Density Adj] using the cursor
up/down keys and press [Change #].
2. Select [Off] or [On].
Correct fine black lines
Set Fine Black Line correction to reduce the black lines
that may occur when copying using the optional docu-
ment processor.
When suppressing black streaks, select [On (Low)].
Select [On (High)] only when the black streaks are not
suppressed with the Low setting.
1. Select [Correcting Black Line] using the cursor up/
down keys and press [Change #].
2. Select [Off], [On (Low)] or [On (High)].
Paper selection
In default settings mode, set the paper selection method
for when an original is set.
1. Select [Paper Selection] using the cursor up/down
keys and press [Change #].
2. Select [APS] or [Default cassette].
1-3-74
Setting auto paper selection
Set the paper selection method for Auto Paper Selection
mode when changing the zoom ratio.
1. Select [APS Setting] using the cursor up/down keys
and press [Change #].
2. Select [Most Suit Size] or [Same as Orig. Size].
Selecting media types
Select Automatic Paper Selection mode for black and
white copying to limit the paper types.
1. Select [Select media type (APS)] using the cursor
up/down keys and press [Change #].
2. Select [Off] or [On].
Selecting default paper source
Automatically selects the default cassette (1 - 4).
The MP tray may not be set as the default cassette.
[Cassette 3] and [Cassette 4] are shown when the
optional paper feeder is installed.
1. Select [Default paper source] using the cursor up/
down keys and press [Change #].
2. Select the cassette to use as the default.
Specifying paper source for cover
Specify the paper source cassette (1 - 4) or MP tray
which is loaded with cover paper.
[Cassette 3] and [Cassette 4] are shown when the
optional paper feeder is installed.
1. Select [Paper Source for Cover] using the cursor
up/down keys and press [Change #].
2. Select the paper source containing the cover paper.
Setting auto % priority
Specify whether to set auto zoom when the paper in the
selected cassette is different from the size of the original.
1. Select [Auto % Priority Setting] using the cursor up/
down keys and press [Change #].
2. Select [Off] or [On].
Adjusting auto density
Adjusts the overall lightness or darkness when copying in
auto exposure mode.
1. Select [Density Adjustment (Auto)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the density.
Adjusting manual density
Adjusts the overall lightness or darkness when copying in
manual exposure mode.
1. Select [Density Adjust. (Manual)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the density.