Connect The Power Cord; Installing Toner; Output An Own-Status Report (Maintenance Item U000); Exit Maintenance Mode - Kyocera KM-2540 Service Manual

2JB/2JC-1

Connect the power cord.

1. Connect the power cord to the connector on the machine.
2. Insert the power plug into the wall outlet.

Installing toner.

1. Turn the main power switch on. Toner installation is started.
2. The drive chain is disengaged when toner installation is completed.
Run maintenance mode U130 if [Add Toner] remains displayed even after the drive chain is disengaged.

Output an own-status report (maintenance item U000).

1. Press the status key.
2. Enter the maintenance mode by entering 10871087 using the numeric keys.
3. Enter 000 using the numeric keys and press the start key.
4. Select MAINTENANCE and press the start key to output a list of the current settings of the maintenance items.
5. Press the stop/clear key.

Exit maintenance mode.

1. Enter 001 using the numeric keys and press the start key. The machine exits the maintenance mode.
Print out the user setting list.
1. Select [Report Print] to output the user various setting reports.
Make test copies.
1. Place an original and make test copies.
Attaching the language label (230 V specifications only).
1. According to need, attach the correspond language label.
1-2-10