Outputting A Mip-Pg Pattern - Kyocera KM-2540 Service Manual

Maintenance
item No.

Outputting a MIP-PG pattern

U089
Description
Selects and outputs the MIP-PG pattern created in the machine.
Purpose
To check copier status other than scanner when adjusting image printing, using MIP-PG pattern output (with-
out scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
Display
GRAYSCALE
MONO-LEVEL
256-LEVEL
1 dot-LINE
3. To change the output conditions of MONO-LEVEL and 1dot-LINE, use the cousor up/down keys to
change the preset values and press the start key to register the setting.
Description
Output density of MONO-LEVEL
1dot-LINE
4. Press the interrupt key.
5. Press the start key. A MIP-PG pattern is output.
6. To return to the screen for selecting an item, press the interrupt key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
PG pattern to be output Purpose
To check the laser scanner unit
engine output characteristics.
To check the drum quality.
To check resolution
reproducibility in printing.
To check fine line reproducibility.
To adjust the position of the laser
scanner unit (lateral squareness)
Setting
range
0 to 255
0 to 21
2JB/2JC
Initial
setting
0
0
1-3-29