Adjusting The Deflection In The Paper - Kyocera KM-2540 Service Manual

Maintenance
item No.

Adjusting the deflection in the paper

U051
Description
Adjusts the deflection in the paper.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
Display
MP TRAY
CASSETTE
CASSETTE2
DUPLEX
MP TRAY (THICK)
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Press the interrupt key.
6. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
7. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from cassette 2
Duplex mode (second side)
Paper feed from MP tray (thick paper)
Original Copy
example 1
Figure 1-3-4
Setting
range
-50 to 127
-50 to 127
-50 to 127
-50 to 127
-50 to 127
Copy
example 2
2JB/2JC
Initial
setting
0
50
50
40
10
1-3-15