Kyocera KM-2540 Service Manual page 16

2JB/2JC-1
Charge erasing system................... Exposure by cleaning lamp
Fusing system................................. Heat roller
Image storage memory................... 64 MB (standard)
Resolution....................................... 600 x 600 dpi
Operating environment ................... Temperature: 10 to 32.5
Dimensions ..................................... 570 (W) x 640 (D) x 767.2 (H) mm (main unit only)
Weight............................................. 75 kg/165 lbs
Floor requirements.......................... 725 (W) x 640 (D) mm (using MP tray)
Power source.................................. 120 V AC, 60 Hz, 11.2 A
Power consumption ........................ 1360 W
Options ........................................... Document processor, paper feeder, document finisher, built-in finisher,
NOTE: These specifications are subject to change without notice.
1-1-2
Heat source: halogen heaters
Abnormally high temperature protection devices: thermostats
°
Humidity: 15 to 80% RH
Altitude: 2500 m/8,202 ft maximum
Brightness: 1500 lux maximum
22 " (W) x 25 " (D) x 30
7/16 3/16
28 " (W) x 25 " (D)
9/16 3/16
220 to 240 V AC, 50 Hz, 6.0 A
job separator, key counter, printer kit and FAX kit
°
C/50 to 90.5 F
" (H)
3/16