Developing Section; Detaching And Refitting The Developing Unit - Kyocera KM-2540 Service Manual

1-5-5

Developing section

(1) Detaching and refitting the developing unit

Follow the procedure below to replace the developing unit.
Procedure
1. Remove the drum unit (see page 1-5-35).
2. Remove two connectors.
3. Remove the developing unit.
4. Replace the developing unit and install the
unit.
5. Refit all the removed parts.
When the developing unit is replaced, per-
form maintenance mode U157 to clear the
counter value (see page 1-3-39).
Developing unit
Connector
Figure 1-5-72
Developing unit
Figure 1-5-73
2JB/2JC
Connector
1-5-39