Video - Yamaha RX-V571 Owner's Manual

Problem
TV sound is not output from the unit.
Only the front speakers output sound
during multi-channel playback.
Noise/hum noise is heard.
Noise is heard when a DTS-CD is being
played back.
The sound is distorted.
The songs from the USB storage device
are played back intermittently.

Video

Problem
No picture.
No picture from the video device
connected with an HDMI cable.
Cause
(When using HDMI Control function) The setting of "TV Audio Input" to
match operations carried out on TV is not set.
(When using the Audio Return Channel function) The Audio Return
Channel function is not working.
The TV is not ARC-compatible and connected to the unit only with an
HDMI cable.
Sound is output from the TV.
The playback device is set to output only 2 channel sound (such as
PCM).
The unit is too close to other digital or radio frequency equipment
(including iPhone).
The cable between the unit and the external device may be
malfunctioning.
(When only noise is output) The playback device is connected by
analog connection.
The devices connected to the output jacks of the unit are not turned on. Turn on all devices connected to the unit.
The transfer rate of the USB storage device is too slow.
Cause
An appropriate input source is not selected on the unit.
An appropriate video input is not selected on the TV.
The video signal output from the unit is not supported by a monitor
connected to the unit.
The cable between the unit, the TV and the video devices may be
malfunctioning.
A video signal (resolution) that the unit does not support is being input.
The connected HDMI device does not support high-bandwidth digital
copyright protection (HDCP).
The number of devices is over the limit.
Remedy
Select the appropriate audio input jack in "TV Audio Input" on the "Setup"
menu.
Set "ARC" in the "Setup" menu to "On" (p.73). Or, the Audio Return Channel
function is activated on the TV.
Connect an optical cable to AV4 (p.20, 21), or other cables and set the
appropriate input source with "TV Audio Input" (p.73).
Set "HDMI Control" (p.72) or "Audio Output" (p.73) correctly to output sound
from the unit.
Set the audio output settings on the playback device.
Move the unit further away from such equipment.
Make sure that all speaker cables between the unit and speakers are
connected properly. If no problem, replace the cables.
Connect the playback device to the unit by a digital connection (optical or
coaxial connection). If you still have a problem, the playback device may have
a problem.
Try another USB storage device.
Remedy
Select an appropriate input source (video device) using the input selection
keys.
Select an appropriate input on the TV.
Set "MON.CHK" to "YES" in the "ADVANCED SETUP" menu (p.77).
Make sure that all cables are connected properly. If no problem, replace the
cables.
You can confirm the video signal (resolution) currently being input in "Signal
Info" in the "Option" menu (p.61). For detail on video signals which the unit
supports, refer to "Information on HDMI" (p.92).
Display "Signal Info" in the "Option" menu to confirm the video signal
(resolution) currently input (p.61).
Disconnect some of the HDMI devices.
84
En