Yamaha RX-V571 Owner's Manual page 20

1 2 3 4 5 6 7 8
Connecting a TV
■
Connection method 2 (HDMI Control -compatible TV)
Connect a TV to the unit with an HDMI cable and an optical cable.
• The following connection and steps are supplied, supposing the "HDMI" in the "Setup" menu has not been
changed from the default setting (p.72).
HDMI OUT jack
ARC
The unit (rear)
HDMI I
HDMI OUT
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1 HDM
ANTENNA
COMPONENT
VIDEO
AM FM
P
R
75Ω
P B
VIDEO
Y
MONITOR OUT
MONITO
L
R
OPTICAL COAXIAL COAXIAL OPTICAL
OPTICAL AV AV
(CD) (TV)
OUT OUT
AV 6 AUDIO1
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AUDIO
(TV)
AV 4
AV4 (OPTICAL) jack
• When connecting a TV to the unit with an HDMI cable, video signals from all types of the video input jacks
can be output from the HDMI OUT jack. For more details, refer to "Video signal flow" (p.91).
• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while
viewing the TV monitor (p.63).
Necessary setting
To use the HDMI control function, the following settings are required in advance.
1
After connecting external devices (TV, playback devices, etc.) and AC
power cable, turn on the unit, TV and playback devices.
2
Configure the settings for HDMI Control.
a Activate the HDMI control function of the TV and the devices that support the HDMI
control function.
For details on setting the HDMI control function, refer to manual of each device.
b Change the input settings for the TV to video signals from the unit.
HDMI input
HDMI
HDMI
HDMI
O
OPTICAL
O
TV
Audio output
(Digital optical)
c Press SETUP.
OPTION OPTION
SETUP
SETUP
Cursor keys
ENTER VOLUME VOLUME
ENTER
RETURN RETURN URN RN N DIS DISPLAY A A DISPLAY D
TOP TOP
POP UP POP UP
d Press the cursor keys (
/ ) to select "HDMI."
e Press the cursor keys (
/ ) to select "HDMI Control," and then press ENTER.
f Press the cursor keys (
/ ) to select "On," and then press ENTER.
g Press SETUP.
h Turn off the TV.
The unit and devices are also turned off automatically with the TV's operation. If they
do not turn off, turn them off manually.
i Turn on the TV.
The unit also turns on. If the unit does not turn on, turn it on manually.
j Change input video source on the TV to video signals from the unit.
Continues to the
next page
20
En