Registering Remote Control Codes For External Device Operations - Yamaha RX-V571 Owner's Manual

■
CODE SET
CODE SET
When the remote control codes for the TV are registered, the TV can
SOURCE RECEIVER
SOURCE/
be operated at any time using the TV control keys, regardless of the
HDMI HDMI
RECEIVER
1 2 3 4
selected input source.
Input selection keys
V-AUX
5
HDMI 1-5
AV
1 2 3 4
V-AUX
AV 1-6
5 6 AUDIO DOCK
AUDIO
TUNER
USB
DOCK
TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
USB
INFO INFO MEMORY MEMORY
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
SLEEP SLEEP ENHANCER ENHANCER DIRECT DIRECT
SCENE
BD SCENE
TV CD RADIO
DVD
• When a TV remote control code is registered to an input selection key, the TV can
OPTION OPTION
VOLUME VOLUME
DISPLAY DISPLAY A A
Registering remote control codes for
POP-UP POP-UP
MUTE MUTE
MENU MENU
external device operations
MODE MODE
Register remote control codes for external devices (such as a BD/
1 2 3 4
DVD player) to control them with the unit's remote control. Because
Numeric keys
5 6 7 8
the remote control codes are registered to each input selection key,
9 0 10 10 ENT ENT
when you select an input source the remote control instantly
TV
INPUT
TV operation keys
switches to control that input source.
TV VOL TV CH
MUTE
INPUT
MUTE
TV VOL
TV CH
• The CD player (Yamaha: 5095) to AV3 as factory default settings. No remote
TV
1
2
Operating the TV with the remote control
INPUT Switches video inputs to the TV.
MUTE Mutes TV volume temporarily.
TV operation
TV VOL Controls the volume of the TV.
keys
TV CH Switches TV channels.
TV Turns the TV on and off.
be operated using the TV operation keys only when the input source with the TV
code registered is selected.
control keys are assigned to other input selection keys.
Use "Remote Control Code Search" in the CD-ROM
to search the available remote control codes for the
category, manufacturer, or external device.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. To reset, repeat from step 2.
3
Press an input selection key.
(Example) When the remote control codes for the BD/DVD
player connected to HDMI1 jack are assigned, press HDMI1.
4
Enter a remote control code (4-digit) using the
numeric keys.
Once the remote control code is registered successfully
SOURCE/RECEIVER will blink twice.
If the registration fails, SOURCE/RECEIVER blinks six times. If
the registration fails, repeat from step 2.
• For details on how to register the input selection key applied the remote
control code on a corresponding SCENE key, refer to "Changing the settings
for the SCENE function" (p.35).
79
En