Warning Messages - Yamaha RX-V571 Owner's Manual

1 2 3 4 5 6 7 8
Optimizing the speaker settings automatically (YPAO)

Warning messages

Even if any warning message is displayed after the measurement, you can save the measurement results. However, we recommend that you perform YPAO again for the optimal
speaker settings.
TV monitor
■
Cause and remedy for each warning message
Warning message Cause
Any of the speaker cables
W-1:Out of Phase
may be connected with the
(W-1:PHASE)
reversed polarity (+/-).
Any of the speakers is
W-2:Over Distance
placed too far from the
(W-2:DISTANCE)
listening position.
There are a significant
W-3:Level Error
volume differences
(W-3:LEVEL)
between the speakers.
The speaker indicator that has a
problem flashes.
YPAO
VOL. VOL.
ENHANCER iPod CHARGE SLEEP
STEREO
TUNED
SW SW
PL
W-1:PHASE
C C
L L
SL SL
Front display
a Check the speaker with warning (indicated with red box) in "Wiring" (p.31).
b Check the connection of the speaker with warning.
c Press RETURN to return to the previous screen.
d Press the cursor key (
) to select "Save / Exit" and press ENTER.
e (If some trouble): Select "EXIT (Exit)" and press ENTER.
(If no trouble): Select "SAVE (Save)" and press ENTER.
f Remove the YPAO microphone to finish YPAO.
g (If some trouble) Turn off the unit and reconnect the speaker. After reconnecting, perform YPAO again.
When using the speakers that are designed with reverse polarity for better performance, this warning may appear even if the speakers are connected
properly.
a Check the speaker with warning (indicated with red box) in "Distance" (p.31).
b Check the placement of the speaker with warning.
c Press RETURN to return to the previous screen.
d Press the cursor key (
) to select "Save / Exit" and press ENTER.
e (If some trouble): Select "EXIT (Exit)" and press ENTER.
(If no trouble): Select "SAVE (Save)" and press ENTER.
f Remove the YPAO microphone to finish YPAO.
g (If some trouble) Turn off the unit and relocate the speaker. After relocating, perform YPAO again.
a Check the speaker with warning (indicated with red box) in "Level" (p.31).
b Check the connection of the speaker with warning. Also check the use environment, or the volume of the subwoofer.
c Press RETURN to return to the previous screen.
d Press the cursor key (
) to select "Save / Exit" and press ENTER.
e (If some trouble): Select "EXIT (Exit)" and press ENTER.
(If no trouble): Select "SAVE (Save)" and press ENTER.
f Remove the YPAO microphone to finish YPAO.
g (If some trouble) Turn off the unit and resolve the problem. After resolving the problem, perform YPAO again.
We recommend using the same speakers or speakers with as similar as possible.
PR
R R
SR SR
Remedy
33
En