Initializing All Remote Control Codes - Yamaha RX-V571 Owner's Manual

■
SOURCE
CODE SET
CODE SET
When the remote control codes for external devices are assigned to
SOURCE RECEIVER
SOURCE/
an input selection key, the external device can be controlled with
HDMI HDMI
RECEIVER
1 2 3 4
the following keys after selecting the appropriate input source or
Input selection keys
V-AUX
5
SCENE.
HDMI 1-5
AV
1 2 3 4
V-AUX
AV 1-6
5 6 AUDIO DOCK
AUDIO
• Use SOURCE/RECEIVER to switch the device to be controlled with menu
TUNER
USB
DOCK
TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
USB
INFO INFO MEMORY MEMORY
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
SLEEP SLEEP ENHANCER ENHANCER DIRECT DIRECT
SCENE
BD SCENE
TV CD RADIO
DVD
SETUP SETUP OPTION OPTION
Menu operation keys
ENTER VOLUME VOLUME
RETURN DISPLAY
TOP POP-UP
MUTE MUTE
MENU MENU
MODE MODE
External device
operation keys
1 2 3 4
Numeric keys
5 6 7 8
9 0 10 10 ENT ENT
TV
INPUT
TV operation keys
TV VOL TV CH
MUTE
INPUT
MUTE
TV VOL
TV CH
TV
• The keys above are only available when there are the corresponding keys on the
Operating external devices
operation keys and numeric keys between the unit and external devices. The unit
can be controlled when SOURCE/RECEIVER glows orange. External devices can
be controlled when the key glows green.
SOURCE
Cursor
Menu operation
ENTER
keys
RETURN
DISPLAY
TOP MENU
POP-UP MENU
External device
operation keys
Numeric keys
TV operation keys
remote control of external devices.

Initializing all remote control codes

Initializing all remote control codes to the initial factory settings.
1
2
3
Turns on and off external
devices.
Selects an item.
Confirms a selected item.
Returns to the previous screen.
Switch the content of display.
Displays the top menu.
Displays a pop-up menu.
Stops playback.
Stops playback temporarily.
Starts playback of the currently
selected song (or video).
Searches backwards/forwards
while pressing them.
Skips to the beginning of the
currently playing song (or
video)/the next song (or video).
Enter numbers.
Operate a TV.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. To reset, repeat from step 1.
Press SOURCE/RECEIVER.
Enter "9981" using the numeric keys.
Once the remote control code is reset successfully SOURCE/
RECEIVER will blink twice. If the reset fails, SOURCE/
RECEIVER blinks six times. If setup fails, repeat from step 1.
80
En