Connecting The Power Cable - Yamaha RX-V571 Owner's Manual

1 2 3 4 5 6 7

Connecting the power cable

7 Connecting the power cable
Before connecting the power cable (General model only)
Set the switch position of the VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.
VOLTAGE
SELECTOR
SURROUND BACK/
BI-AMP
CENTER R SURROUND L R L
SINGLE
110V-
120V
220V-
240V
SPEAKERS
VOLTAGE
SELECTOR
SUBWOOFER
• The VOLTAGE SELECTOR on the rear panel of the unit must be set for your local voltage BEFORE
plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may
cause damage to this unit and create a potential fire hazard.
After all connections are complete, connect the power plug to the outlet.
Plug into a wall outlet
SURROUND BACK/
BI-AMP
R SURROUND L R L
SINGLE
SUBWOOFER
• The figure of the power plug may differ depending upon regions.
8
28
En