Init.n/W Set; Ext.i/F Menu - Canon Color image RUNNER LBP5360 User Manual

■ INIT.N/W SET.

6

EXT.I/F MENU

CONNECT.RECOG.
6-50 SETUP Menu Settings
NOTE
For more details on configuring the Ethernet driver, see "Chapter 2 Common
•
Network Settings" in Network Guide.
This item is displayed only when NETWORK in the I/F CONNECTION options is
•
set to ON.
-
By the initialization in this item, you can reset the network settings to the default
settings.
The network settings can be initialized using the following procedure.
1.
Press [Settings].
2.
Select INTERFACE MENU using [
3.
Select NETWORK MENU using [
4.
Select INIT.N/W SET. using [
5.
<OK?> is displayed. The initialization starts by pressing [OK].
* If you press [Online] without pressing [OK], the printer does not initialize the settings but becomes
ready to print.
NOTE
This item is displayed only when NETWORK in the I/F CONNECTION options is
set to ON.
-
This is the setting for the expansion interface board installed in the expansion slot
of the printer. For more details, see the instruction manual supplied with the
expansion interface board.
NOTE
This item is displayed only when the optional expansion interface board is installed,
and EXT.INTERFACE in I/F CONNECTION is set to ON.
ON*, OFF
When you print using a network, you may not obtain proper printout results
(Unreadable characters are printed, etc.). In this case, specify OFF for this item.
] and [ ], then press [OK].
] and [ ], then press [OK].
] and [ ], then press [OK].