Calibrate Timer - Canon Color image RUNNER LBP5360 User Manual

■ POWER SAVE TIME
00:00 to 23:59
If POW. SAVE TIMER (See the previous item) is set to ON, the printer enters
Power Save Mode 1 (the Panel Off mode) when the time specified in this item has
elapsed.
This item is convenient if you want to set the printer to Power Save Mode 1 (the
Panel Off mode) on the same time everyday.

■ CALIBRATE TIMER

OFF*, ON
Specifies whether the calibration of the printer should be started when the time
specified in CALIBRATE TIME (See the next item) has elapsed.
If ON is specified, calibration of the printer is started when the time specified in
CALIBRATE TIME has elapsed.
If OFF is specified, calibration of the printer is not started even when the time
specified in CALIBRATE TIME has elapsed.
Calibration adjusts a phenomenon of "Out-of-Register Colors" and controls the
print density (adjusts color hues).
NOTE
Calibration is not performed if the printer is receiving print data at the time specified
in CALIBRATE TIME.
■ CALIBRATE TIME
00:00 to 23:59
If CALIBRATE TIMER (See the previous item) is set to ON, calibration of the
printer is started when the time specified in this item has elapsed.
This item is convenient if you want to calibrate the printer on the same time
everyday.
HARD DISK
ON*, OFF
Specifies whether to use the following functions that require a hard disk.
Interrupt print
•
Changing the order of print data
•
Changing the attributions of print data (print copies, etc.)
•
Pausing/Resuming print data processing
•
SETUP Menu Settings
6
6-19