Installing A Hard Disk - Canon Color image RUNNER LBP5360 User Manual

Installing a Hard Disk

A hard disk is to be installed in the expansion slot at the rear side of the printer unit.
Make sure that all the following items are contained in the package before installing
a hard disk. If any item is missing or damaged, please contact your local authorized
Canon dealer.
Connector cable
Power OFF operation
procedure label
When using a hard disk, you need to install the ROM for the hard disk supplied with
9
the hard disk. Install the ROM as well as the hard disk. A Phillips screwdriver is
required for installing a hard disk and the ROM. Have a screwdriver ready in
advance that matches the size of the screws.
Observe the following guidelines when installing the hard disk.
WARNING
Be sure to turn the printer OFF, unplug the power plug, and then disconnect all
the interface cables and power cord from the printer before installing a hard
disk. If you attempt to install a hard disk when the printer is ON or any cable is
connected to the printer, this may result in an electrical shock.
CAUTION
Be careful when handling the main board or hard disk. Touching the edges or a
sharp portion of the main board or hard disk may result in personal injury.
9-22

Installing a Hard Disk

Hard Disk ROM for the hard disk
Guide sheet Screws
(2 pieces)
Caution labels
(2 sheets)
Encrypted Secured Print Driver
Add-in For Client PC