Table of Contents
Advertisement
■ WAKE UP TIME
■ POW. SAVE TIMER
6
6-18
SETUP Menu Settings
00:00 to 23:59
If WAKE UP TIMER (See the previous item) is set to ON, Power Save Mode (the
Panel Off mode and the Printer Power Save mode) is released when the time
specified in this item has elapsed.
This item is convenient if you want to release the printer from Power Save Mode
(the Panel Off mode and the Printer Power Save mode) on the same time
everyday.
OFF*, ON
Specifies whether the printer should enter Power Save Mode 1 (the Panel Off
mode) when the time specified in POWER SAVE TIME (See the next item) has
elapsed.
If ON is specified, the printer enters Power Save Mode 1 (the Panel Off mode)
when the time specified in POWER SAVE TIME has elapsed.
If OFF is specified, the printer does not enter Power Save Mode 1 (the Panel Off
mode) even when the time specified in POWER SAVE TIME has elapsed.
While the printer is in Power Save Mode 1 (the Panel Off mode), the display on the
control panel is off, and the following indicators are on.
Printer Status
When the printer is
online
When the printer is
offline
NOTE
The Job indicator is on while a job is being stored into a box even if the printer is in
•
Power Save Mode (The printer can store jobs into the boxes only when a hard disk
is installed in the printer).
As well as Power Save Mode 1 (the Panel Off mode), this printer has Power Save
•
Mode 2 (the Printer Power Save mode). For details on Power Save Mode, see
"Power Saving (Power Save Mode)," on p. 3-2.
The printer does not enter Power Save Mode 1 (the Panel Off mode) during printing
•
even when the time specified in POWER SAVE TIME has elapsed.
You can specify whether the printer should enter Power Save Mode when an error
•
is occurring in the printer (when the Message indicator is on, or the number in the
message blinks). (See "PWR SAVE IN ERR," on p. 6-14)
Indicator that Comes On
Ready Indicator
Message Indicator
Advertisement
Table of Contents
